Oct 3, 2026 · Free Guide

“ADS” - Let Claude Launch and Manage Your Meta Ads (Even If You've Never Run One)

There is no reason to not be running ads anymore. Even if you've never run an ad in your life. Connect Claude to Meta, install this free skill, answer a few plain questions, and it builds the campaign and manages it for you.

The "I don't know how to run ads" excuse is gone

I've run ads for over 10 years, for hundreds of different clients, and generated over $15M for them. So trust me on this one: the idea was never the hard part. Ads Manager was.

A hundred settings. Most of them you should never touch. And one wrong pick (hello, traffic campaign) quietly burns your budget while you wonder why nobody's buying.

That part is handled now. Meta released an official connector that lets Claude work inside your ad account. And I built a free skill called meta-ads-launch that tells Claude exactly what to do in there: what to build, when to leave it alone, when to scale, and when to cut.

A skill is just a file of instructions Claude reads before it does a job. This one runs everything off one number: what you're willing to pay for a customer.

REAL TALK
  • This skill is brand new. You won't see a results screenshot in this guide, because I'm not going to make one up.
  • It doesn't guarantee your ads make money. Your offer and your landing page still have to do their job.
  • You still pay Meta for the ads.
  • You still approve every change. Nothing happens to your budget without a yes from you.
What it removes is the excuse.
BEFORE YOU START

What you need first

  • Claude. The Claude Desktop app, or Claude Code if you already use it.
  • A Meta ad account. This is where the ads get billed.
  • A Facebook Page. Your ads run from it. If you have an Instagram account connected, they run from that too.
  • A working pixel. It has to be firing the event you care about: a Purchase, a Lead, or a booked call.
  • An ad budget. The skill is free. The ads are not. You pay Meta directly.

Heads up on the pixel, because this is the one that stops people. The pixel is the little piece of tracking on your website that tells Meta when somebody buys, opts in or books. Without it, Meta has no idea who your customers are, and it can't go find more of them.

The skill checks this. If your conversion event hasn't fired in the last 7 days, you can still finish setup, but it blocks the launch until tracking is fixed. That's on purpose. Launching without it means paying Meta to guess.

NO PIXEL YET? THE SHORT VERSION
  1. Go to Meta Events Manager, click Connect data, pick Web, and name your pixel.
  2. Enter your website URL. Meta checks if your platform has a partner integration (Shopify, WooCommerce, WordPress and plenty more do). If it does, take it. No code.
  3. Make sure the event that matters fires: Purchase on your order confirmation page, Lead on your opt-in thank-you page, or a booking event on your "call booked" page.
  4. Open the Test Events tab, run a test purchase or opt-in on your own site, and watch it show up.

Not sure if yours works? Run setup anyway. It tells you exactly which events fired in the last 7 days. Meta's full pixel walkthrough is linked at the bottom.

STEP 1

Connect Claude to Meta

This is Meta's own official Ads connector. It's free. No developer account, no API keys. You log in with Facebook and that's it.

Pick the one that matches how you use Claude. You only need one.

OPTION A: CLAUDE DESKTOP APP OR CLAUDE.AI
  1. Open Settings, then Connectors.
  2. Add Meta Ads. If you don't see it in the list, choose Add custom connector and paste the URL below.
  3. Log in with Facebook and give it access to your ad account.
https://mcp.facebook.com/ads
OPTION B: CLAUDE CODE IN THE TERMINAL
  1. Open your terminal (Mac: Command + Space, type Terminal. Windows: open PowerShell).
  2. This is one line. Copy the whole thing below, paste it, and hit Enter.
  3. Open Claude Code again (type claude in Terminal) and log in with Facebook when it asks. If it doesn't ask, type /mcp, pick meta-ads, and log in from there.
claude mcp add --transport http meta-ads https://mcp.facebook.com/ads

Quick test. Ask Claude: "List my Meta ad accounts." If your account shows up, you're connected.

Skipped this step by accident? No stress. The skill checks for the connector on its first run and gives you these same instructions if it's missing.

One more thing. If Meta lets Claude read your account but blocks it from making changes, the skill has a backup route through Meta's official command line tool and walks you through it. That route is more technical, so only go there if you have to.

STEP 2

Install the skill

No terminal needed.

Step 1. Open the Claude Desktop app (or Claude Code, if you already use it).

Step 2. Copy-paste this into the chat and hit Enter:

Install this skill for me: https://github.com/tenfoldmarc/meta-ads-launch-skill

Claude downloads the skill and tells you when it's ready. Takes a few seconds.

Step 3. Type /meta-ads-launch and hit Enter.

Prefer the terminal?

Open Terminal (Mac: Command + Space, type Terminal). This is one line, copy the whole thing and hit Enter:

git clone https://github.com/tenfoldmarc/meta-ads-launch-skill ~/.claude/skills/meta-ads-launch

Then type claude to open Claude Code, and type /meta-ads-launch to get started.

Already have it? Paste this into Claude to grab the latest version:

Update the meta-ads-launch skill from https://github.com/tenfoldmarc/meta-ads-launch-skill

Your settings and campaign history are kept when you update.

STEP 3

Run setup (about 10 minutes, one time)

The first time you type /meta-ads-launch, setup runs automatically. Want to redo it later (new offer, new target, new countries)? Type /meta-ads-launch setup.

It asks one or two questions at a time, and every question comes with a suggested answer. A lot of the time you just say yes.

First, it audits your ad account

Before it asks you anything, it looks at your last 90 days: what you spent, what you got, your best audiences, your best ads, which countries convert cheapest, and where money is leaking. Then it gives you a short summary in plain English.

Brand new account with no history? Fine. It says so, skips the stats, and starts you on proven defaults.

Then it asks about your business

QUESTION 1
What are you selling?
Name, a one-line description, and the price.
QUESTION 2
What's the goal?
Sales, leads, or booked calls. Whichever you pick, it builds a conversion campaign. Never a traffic campaign, even if cheaper clicks sound tempting. Traffic campaigns find clickers, not buyers.
QUESTION 3
Your landing page.
It loads the page once to make sure it actually works.
QUESTION 4
Your target cost per customer.
The most important number in the whole system. How to pick it is right below.
QUESTION 5
Your daily budget.
It suggests one, then runs a sanity check on it. Also below.
QUESTION 6
Countries.
The default is the US, Canada, the UK, Australia and New Zealand. You can add more.
QUESTION 7
Your max daily budget cap.
The most you'd ever want one campaign to spend in a day. It will never propose more than that. The default is 5x your starting budget.

It also asks if you want to exclude people who already bought. If your offer touches credit, financing, jobs, housing or politics, it asks about that too, because Meta restricts targeting for those. And if you already have campaigns running, it asks if you want it to manage them. It only takes on the ones you pick.

How to pick your target cost per customer

Don't overthink it. Two numbers.

  • Your break-even. Price times margin. If you sell a $97 product and keep $70 of it, anything under $70 per sale is profitable on the first purchase.
  • Your history. What your account has actually been paying per customer. The audit shows you this.

The skill suggests the lower of the two. No history yet? Then your break-even math is what you've got. Pick a number under it.

The budget sanity check

Your daily budget should be at least 1x your target cost per customer. Ideally 2x to 3x. So with a $40 target, that's $40 a day minimum, and $80 to $120 a day is better.

Why? Below 1x, a campaign can go days without a single conversion, and the 3-day reviews turn into guesswork. It won't stop you from going lower, but it will tell you straight.

Setup ends by creating the daily check (more on that below) and asking if you want to launch your first campaign.

STEP 4

Launch your first campaign

Type /meta-ads-launch. It shows you the plan in one message (offer, goal, landing page, target, budget, countries). You change something or say good to go.

Here's what it builds:

  • A conversion campaign. Optimized for the thing you actually want: purchases, leads or booked calls.
  • One budget at the campaign level. Meta spreads it across the ad sets on its own.
  • 3 ad sets testing 3 audiences. Broad, interests and lookalike.
  • The same ads in all 3. 3 to 5 ads, identical in every ad set, so the audience test is fair.
Ad setWho it targets
1. BroadYour countries, plus age and gender. That's it. Meta's Advantage+ audience goes and finds the buyers.
2. InterestsThe best interest targeting from your account history. No history? It researches 3 to 6 interests tied to your offer and shows them to you first.
3. LookalikePeople who look like your existing buyers or leads (a 1% to 3% lookalike). Nothing to build that from yet? It uses a second set of interests, or a lookalike of people who engage with your Page or Instagram, and tells you which.

For the ads themselves you get three options: use ads or posts already in your account, hand it your own image and video files, or have it write new ones. If it writes video scripts, you film them first. It saves the scripts and waits for your files.

Before it builds anything, it runs its checks and blocks the launch if one fails: your conversion event fired in the last 7 days, your landing page loads, and your ads exist.

Everything gets built paused. It shows you the full campaign with an Ads Manager link so you can look at it yourself. Nothing spends a dollar until you say go.

You'll spot its campaigns in Ads Manager easily. Their names all start with [MAL].

THE ENGINE

How it manages your campaign

This is the part people get wrong on their own. They launch, panic on day 1, and start changing things. Or they never look at it again.

The first 3 days: hands off. Meta needs time to learn. The skill won't touch anything. It only watches for real problems, like a disapproved ad or a campaign getting zero impressions, and tells you.

Then a review every 3 days. It looks at the last 3, 7, 14 and 21 days (whatever the campaign is old enough for), complete days only, and compares what you're actually paying per customer to your target.

One number decides everything.

Your cost per customer vs your targetWhat it does
At or under target, with 3+ conversionsAsks to scale the budget 20%.
Up to about 30% overLeaves it alone. Lets it run.
30 to 50% overSomething has to change. If you just scaled, it proposes rolling back to the exact previous budget. Brand new campaign? It flags it and checks again in 3 days. Running a week or more? It writes new ads and proposes pausing the losers.
More than 50% overProposes turning off the ads and ad sets that aren't converting, and writes new ads to test.
No conversions yetWaits until the campaign has spent 2x your target. Past that, it treats it like "more than 50% over."

On campaigns that have been running 3 weeks or more, it checks the trend before it cuts. Recovering? It gives it 3 more days. Not recovering? It cuts the losers, or cuts the budget 30% if there isn't enough left worth cutting.

A few details that matter:

  • Scaling is a ladder. Plus 20%, wait 3 days, still under target, plus 20% again. One budget change per campaign per review, at least 3 days apart.
  • A rollback goes to the exact previous budget. $120 goes back to $100. Not "minus 20%," which would land you at $96.
  • It won't judge an ad too early. An ad that hasn't spent at least 1x your target doesn't get cut. Not enough data.
  • It knows the difference between bad ads and broken tracking. If conversions drop to zero across every campaign at once, it cuts nothing and tells you to check your pixel.
  • Writing new ads is just writing. Nothing new goes live until you approve launching it.

You approve everything

Every review ends with a numbered list of proposals and the numbers behind each one. To say yes to all of it, you reply:

approve all

Or pick and choose: approve 1, 3 or skip 2. Proposals stay open for 48 hours. After that they expire and get re-analyzed with fresh data.

WHAT IT WILL NEVER DO
  • Change a budget or turn anything off without your approval.
  • Delete anything. It only pauses.
  • Touch campaigns it didn't launch, unless you told it to manage them.
  • Go above the max daily budget you set.

Every decision is logged with the numbers behind it. So you can always ask "why did it do that?" and get a real answer.

CHEAT SHEET

The commands

/meta-ads-launch
Launch a new testing campaign. Setup runs automatically the first time.
/meta-ads-launch setup
Redo setup: new offer, new target, new countries.
/meta-ads-launch status
Every campaign vs your target, at a glance.
/meta-ads-launch review
Approve or skip pending changes.
/meta-ads-launch optimize
Run a review right now instead of waiting for the daily check.

The daily check. Setup creates a scheduled task called Meta Ads Optimizer that runs every day at 9am (you can pick another time). Each campaign only gets reviewed when it's due: day 3 after launch, then every 3 days. Most days the report is one line. Nothing due today.

It runs while the Claude app is open. Closed at 9am? It runs the next time you open it. If Claude can't create the task for you automatically, it hands you the exact prompt and the steps to add it yourself.

Want it off? Find Meta Ads Optimizer in your scheduled tasks and toggle it off. Your campaigns keep running as they are. Nothing gets paused when the optimizer stops.

Need ads to launch?

This skill launches and manages. My other free skills make the ads. If they're installed, this one uses them automatically whenever it needs new creatives.

What you needFree skill
Image adsad-image-skill, ad-image-gen-skill, meta-ads-generator-skill
Ad copyad-copy-skill
Video ad scriptsvideo-ad-copy-skill
See what competitors are runningad-spy-skill

Install any of them the same way: paste Install this skill for me: followed by the link.

Don't have any of them? It still works. It writes 3 ad concepts on its own.

You don't need to learn Ads Manager. You need an offer, a pixel, and a number you're willing to pay for a customer. You're still the one paying for the ads, so check in on your campaigns, especially the first couple of weeks. Now go launch something.

All Resources

Meta Ads Launch Skill (GitHub)The free skill from this guide
→
Claude DesktopDownload the app
→
Claude CodeIf you prefer the terminal
→
Meta Ads AI ConnectorsMeta's announcement of the official connector
→
Set up the Meta pixelMeta's own walkthrough
→
Ad Copy SkillFree, writes your ad copy
→
Ad Image SkillFree, makes image ads
→
Ad Image Gen SkillFree, makes image ads
→
Meta Ads Generator SkillFree, makes image ads
→
Video Ad Copy SkillFree, writes video ad scripts
→
Ad Spy SkillFree, shows what competitors run
→

The Next Step

Guides show you what. AI Builders shows you how.

Inside the community, I walk through every build live, including the stuff that doesn't make it into guides. Regular people (not developers) figuring out AI together, shipping real projects, asking me anything. No fluff, no theory, just the actual work.

Join AI Builders→

skool.com/ten-fold